Have Questions?
Always the correct part
We know our products
Mounting, Balancing
Free shipping on all orders
Total items
Product subtotal
Polaris Ranger XP 1000 Bump Steer Delete (BSD)™ Tie Rod Kit (Patented geometry location. Patent # 9,988,083 B1)
Our BSD™ Tie rod kit does wonders for the Polaris Ranger XP 1000. Through rigorous testing of our shop car, we found that the Ranger had a lot of steering wheel feedback. After cycling the front suspension we found a good amount of bump steer in the factory system. Bump steer is a change in toe setting (front of tires closer together than the rear of the tires) through the cycle of front suspension travel. The best set up is as close to zero toe change as possible. If your front tires change toe setting they are essentially doing the same thing as you turning the steering wheel slightly on every bump you hit. Bump steer is one of the biggest contributors to steering wheel feedback, twitchy drive ability, excessive front end wear and worn out forearms from trying to keep the car straight. So in an effort to eliminate all of these things we developed our BSD™ (bump steer delete™) tie rod kit for the Ranger. Our kit relocates the outer tie rod pivot point which changes the front end geometry. With the bump steer removed the car is much easier to drive, steer and control. Your front end parts will last longer. Your car will drive more predictably. Your forearms will have no arm pump. The whole driving experience will become easier. Don't wait, install our BSD™ Tie Rod Kit today
THIS KIT IS DESIGNED TO FIX THE GEOMETRY OF THE FACTORY ARM CONFIGURATION. ALL AFTER MARKET A ARMS CONFIGURATIONS PRODUCE A DIFFERENT AMOUNT OF BUMP STEER. ***BUMP STEER MUST BE MEASURED PRIOR TO INSTALLATION OF THE KIT***
The factory car has ZERO adjust ability for alignment other than toe set. Caster and Camber can NOT be adjusted. Toe adjustment with our BSD kit will not affect any other aspect of the alignment since nothing else is adjustable.
THIS KIT IS DESIGNED TO FIX THE GEOMETRY OF THE FACTORY ARM CONFIGURATION. ALL AFTER MARKET A ARMS CONFIGURATIONS PRODUCE A DIFFERENT AMOUNT OF BUMP STEER. ***BUMP STEER MUST BE MEASURED PRIOR TO INSTALLATION OF THE KIT***
Return & Refund Policy – One Shot Powersports
Need to return or exchange an item? We’ve got you covered. One Shot Powersports accepts returns within 14 days of the original ship date, provided the item is new, unused, and in the manufacturer’s original packaging. Returns that do not meet these requirements may be subject to a restocking fee (details below).
Return & Exchange Instructions:
To begin a return, please download and complete our Return Form and include it inside the package with your returned item(s).
Return Shipping:
We strongly recommend insuring your return shipment for the full value of the item. One Shot Powersports is not responsible for any lost or damaged packages during return transit.
Please do not ship items using the manufacturer’s packaging as the shipping container. This often results in damage, and the item will no longer be considered “new and unused.” Items that are installed, scratched, damaged, or show signs of use will not be eligible for a full return and may incur a restocking fee or be denied entirely. If your return is denied, you will be responsible for return shipping if you want the item sent back to you.
Non-Returnable Items:
The following items are non-returnable under any circumstances:
If you’re unsure whether your item qualifies for return, please reach out to our customer support team before sending it back.
Refused Packages:
If a package is refused by the customer without prior approval from One Shot Powersports, the cost of return shipping will be deducted from any applicable refund.
Refunds:
Approved refunds will be issued back to the original form of payment.
Nam tempus turpis at metus scelerisque placerat nulla deumantos solicitud felis. Pellentesque diam dolor, elementum etos lobortis des mollis ut risus. Sedcus faucibus an sullamcorper mattis drostique des commodo pharetras loremos.Donec pretium egestas sapien et mollis. Pellentesque diam dolor cosmopolis etos lobortis.
| Comodous: | Comodous in tempor ullamcorper miaculis |
| Mattis laoreet: | Pellentesque vitae neque mollis urna mattis laoreet |
| Divamus de ametos: | Divamus sit amet purus justo |
| Molestie: | Proin molestie egestas orci ac suscipit risus posuere loremous |
Yes it is.
Please make sure that you follow below steps:
1/ Download the package from themeforest.net (the file is in zip format)
2/ Extract the file you've just downloaded.
3/ Find this file: ella-3.0.0-sections-ready.zip in the folder Ella Sections Ready 3.0.0, then you just need to upload ella-3.0.0-sections-ready.zip file to your Shopify store.
To save your time and reach our support quickly, please follow below steps:
1/ Create a staff account for us (with Themes permission and Settings permission) http://docs.shopify.com/manual/settings/account/staff-members
2/ Capture screenshot or video for the issue you get.
3/ Specify which template and version you are using.
4/ Describe clearly how to reproduce the issue.
5/ Send all information (staff account, screenshot, video, template name and version, description of the issues, link) to email@domain.com
Yes, we will assist you to install the template if needed
Yes, we do. Please send your customisation requests to email@domain.com, we will give you our quote. Thank you.
Yes. You can turn on/off the animation in the Setting page.
Yes. You can turn on/off almost any blocks on the page (featured products, slideshow, banners, related products, recent products,...).
Yes, we have a setting for you to switch between these two options: Display on Hover and Display on Click.
The theme package includes theme source, Photoshop design files, sample data and manual guide.
That is not a problem. You just need to modify the width/height ratio in theme settings.
BUY NOW, PAY LATER. Starting at 0% APR 
