PLEASE NOTE: An EVP CodeShooter Flashing Device is required for all Paragon Turbo Systems for the MG1 ECU.
All Paragon Turbochargers are built to the highest standards. The rotating assemblies are VSR balanced at over 100,000 RPMs, which provides stability and durability at high boost. The exhaust housings are ceramic coated to keep radiant heat in check, which maximizes exhaust velocity and spooling while preventing corrosion. Each compressor wheel is color anodized for style, durability, and easy identification. The compressor housings are powder coated to maintain their appearance no matter what you put your SXS through. Every internally wastegated turbocharger has a Turbosmart wastegate actuator with an easily adjustable turnbuckle for quick adjustments. Lastly, every Paragon turbocharger is serialized and carries an industry exclusive 6-month limited warranty.
EVP PARAGON P43-310 TURBO SYSTEM INCLUDES:
EVP Blow Off Valve 2.0 (BOV) Kit for X3
EVP Paragon 43 Charge Tube Kit for 2020-'X3
EVP Turbo Race Intercooler for 2020-'X3
EVP 'The Clamp' Plenum Reinforcement Brace for X3
EVP Paragon 43 V-Flow Intake Kit for 2020-'X3
EVP 1000cc Injectors (Set Of 3)
EVP 1000cc Fuel Injector Adapter Kit for 2020+ Turbo RR (Set of 3)
EVP Paragon 43/42 Blue Turbocharger Assembly for X3 MG1 ECU
EVP 9mm Head Stud Kit for X3
EVP 340LPH Fuel Pump Kit for X3
Brisk X3 Replacement Spark Plugs
Full P43-310 install kit with all required hardware
Do you already own an EVP part from this turbo kit? If so, contact EVP directly to custom build your order today at (715) 247-3862 or at givemepower@evopowersports.com.
EVP DISCLAIMER: CLUTCHING YOUR VEHICLE IS MANDATORY WITH ALL EVP TURBO SYSTEMS. IT IS UP TO THE CUSTOMER TO ENSURE THE VEHICLE IS EQUIPPED WITH THE PROPER CLUTCHING REQUIREMENTS. TO SHOP CLUTCHING FOR YOUR VEHICLE, PLEASE CLICK HERE.
DYNO NOTE: Due to the MG1 ECU torque strategy, the boost figures listed represent maximum boost on a hot engine. When intake temps are cooler, boost will be lower, however, it will make the same power as when the boost is higher. The ECU always tries to make the same power given environmental conditions and it does this by allowing the boost to increase as the intake temperature climbs.
2021-2023 MAVERICK X3 TURBO RR MG1 ECU NOTE: All 2021-2023 X3 Turbo RR ECU's that have not been previously unlocked by EVP must be sent to our Wisconsin facility to have the unlock procedure performed before installing Paragon Turbo Systems. If your ECU has not been previously unlocked by EVP, please select "No" in the drop-down menu below, and then Add to Cart.
All orders for ECU's requiring an Unlock will receive an empty box with return shipping label, packaging, and instructions for removing your ECU for shipment to our Wisconsin facility. Turnaround time for the ECU Unlock Service is approximately 7-10 business days (upon receiving the ECU in Wisconsin). All ECU's will be shipped back to customers via UPS 2nd-Day Air.
Need to return or exchange an item? We’ve got you covered. One Shot Powersports accepts returns within 14 days of the original ship date, provided the item is new, unused, and in the manufacturer’s original packaging. Returns that do not meet these requirements may be subject to a restocking fee (details below).
Return & Exchange Instructions:
To begin a return, please download and complete our Return Form and include it inside the package with your returned item(s).
Return Shipping:
We strongly recommend insuring your return shipment for the full value of the item. One Shot Powersports is not responsible for any lost or damaged packages during return transit.
Please do not ship items using the manufacturer’s packaging as the shipping container. This often results in damage, and the item will no longer be considered “new and unused.” Items that are installed, scratched, damaged, or show signs of use will not be eligible for a full return and may incur a restocking fee or be denied entirely. If your return is denied, you will be responsible for return shipping if you want the item sent back to you.
Non-Returnable Items:
The following items are non-returnable under any circumstances:
All electrical-related products
All fluids, including oils, aerosols, grease, and similar products
Custom-built items (such as roll cages, powder-coated components, etc.), unless explicitly approved for return
If you’re unsure whether your item qualifies for return, please reach out to our customer support team before sending it back.
Refused Packages:
If a package is refused by the customer without prior approval from One Shot Powersports, the cost of return shipping will be deducted from any applicable refund.
Refunds:
Approved refunds will be issued back to the original form of payment.
Nam tempus turpis at metus scelerisque placerat nulla deumantos solicitud felis. Pellentesque diam dolor, elementum etos lobortis des mollis ut risus. Sedcus faucibus an sullamcorper mattis drostique des commodo pharetras loremos.Donec pretium egestas sapien et mollis. Pellentesque diam dolor cosmopolis etos lobortis.
Comodous:
Comodous in tempor ullamcorper miaculis
Mattis laoreet:
Pellentesque vitae neque mollis urna mattis laoreet
Divamus de ametos:
Divamus sit amet purus justo
Molestie:
Proin molestie egestas orci ac suscipit risus posuere loremous
1/ Download the package from themeforest.net (the file is in zip format)
2/ Extract the file you've just downloaded.
3/ Find this file: ella-3.0.0-sections-ready.zip in the folder Ella Sections Ready 3.0.0, then you just need to upload ella-3.0.0-sections-ready.zip file to your Shopify store.
To save your time and reach our support quickly, please follow below steps:
2/ Capture screenshot or video for the issue you get.
3/ Specify which template and version you are using.
4/ Describe clearly how to reproduce the issue.
5/ Send all information (staff account, screenshot, video, template name and version, description of the issues, link) to email@domain.com
Yes, we will assist you to install the template if needed
Yes, we do. Please send your customisation requests to email@domain.com, we will give you our quote. Thank you.
Yes. You can turn on/off the animation in the Setting page.
Yes. You can turn on/off almost any blocks on the page (featured products, slideshow, banners, related products, recent products,...).
Yes, we have a setting for you to switch between these two options: Display on Hover and Display on Click.
The theme package includes theme source, Photoshop design files, sample data and manual guide.
That is not a problem. You just need to modify the width/height ratio in theme settings.
Recently Viewed Products
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies.
privacy policy
BUY NOW, PAY LATER. Starting at 0% APR 
